• Model NO.：1071000601
• Weight：280g
• Color：White
• Sku：1071000601
• Wave Length：440nm-480nm
• Power Supply：Rechargeable Lithium Battery
• Transport Package：Carton for Dental Curing Light
• Specification：Cv -gun
• Trademark：Azdent or OEM
• Origin：Henan, China (Mainland)
• Production Capacity：10000 Pieces,Month

Basic Info.

Model NO. 1071000601 Weight 280g Color White Sku 1071000601 Wave Length 440nm-480nm Power Supply Rechargeable Lithium Battery Transport Package Carton for Dental Curing Light Specification Cv -gun Trademark Azdent or OEM Origin Henan, China (Mainland) Production Capacity 10000 Pieces/Month

Product Description

High intensity Dental LED curing light Wireless LED Dental Curing Light 

Introductions of Dental LED Curing Light:

1.Technical specifications:

1.1Dimensions: 25mm×25mm×240mm
1.2 Net weight: 280g
1.3 Power source
1.3.1 Power supply: rechargeable Lithium battery
1.3.2 Battery mode: ICR 18490
1.3.3 Battery voltage and capacity: 3.7V/ 1400mAh,Battery has protection against Over-voltage, over-current and short circuit.
1.3.4 Adapter Power Input: 100V to 240V, 50Hz/60 Hz Input Power: 10VA Power Output: DC5V/1A
1.4 Light source:
1.4.1 5W high power blue light LED
1.4.2 Checking method: the LED light is fine when the light is on during operating correctly.
1.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M, Dentsply etc.
1.4.4 Wave length: 440nm-480nm
1.5 Light intensity: 1200mW/cm2~1600mW/cm2

 

2. Operation:

2.1 Press the mode button. Following two modes are available.
2.1.1 TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 1200 mW/cm2-1600mW/cm2
2.1.2 NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 1200mW/cm2-1600 mW/cm2
2.2 During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound, the curing light radiates blue light and starts working according to the set modes. Meanwhile, it starts counting down and will produce tone at every 5 seconds, it stops working when counting down to "0".
2.3 During operation, the blue light can be stopped by press the power button at any time.
2.4 After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times.
2.5 Low power detective circuit is fixed inside of the main unit, when low power is detected, the display screen of main unit will wink, please charge in time.
2.6 When the battery needs to be charged, connect the plug of the adapter into the AC100V~240V power supply. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, and then the logo turn to blue. Put the main unit to the charging point of the pedestal, the display screen turn to scrolling display, and the curing lights starts charging.
2.7 After operating, take off the disposable sleeve and throw away, forbidden to reuse.
2.8 This equipment will turn off automatically if don't any action within 2 minutes, turn it on by press any button.
2.9 The depth of solidification of composite is no less than 2mm per 1 second

 

Packaging and shipping: 
1. Mainly packed by carton or other common security package, you also can give us your special requirements about it. We will try our best to make sure the goods arrive safely.
2. Delivery: About 5 days after order confirmed.
3. Freight: The freight cost will charge according to the weight of detailed order.
4. Shipment: Your goods could be shipped to you as your requirement such as by air or by sea, full way tracking for your cargos offered before the arrival of the goods.  




Other Dental Products for Your Choice:




Company Information
Baistra Corporation was established in 1998. which is specialized in manufacturing and exporting dental equipment, we have a group of honest, kind, and hard-working people with a thrifty and responsible attitude that has won all our customers' trust .


 

Why Choose Baistra Company:
1. Professional on dental field for 24 years with advanced facility.
2. Factory price with best quality
3. Accept custom order, available in thickness and package
4. Offer OEM service.
5. Fast service and on-time delivery
6. Sample small quantity sample are available at any time.

 

Our services:

Pre-sale service:

1. 24 hours online, please feel free to contact us anytime.

2. Provide our customers best quality product.

3. High degree of expertise to solve any problems 

After sale service:

1. Fast delivery with tracking number provided to make sure ou can receive your goods fast and safety.

2. Offer free warranty service.

3. Focus on every client's satisfaction. Professional team will solve any problems you may meet In the process of using.

 

FAQ:

1.Q:Can I have a sample order?
    A:Yes, we welcome sample order to test and check quality. 

2.Q:What about the lead time?
   A:Sample needs 3-5 days, mass production needs 1-2 weeks depends on order quantity.

3.Q:How do you ship the goods and how long does it take to arrive?
   A:We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

   

Any questions, please send us message freely!