• Model NO.：Low speed handpiece
• Application：Adult, Child
• Loading Way：Gland Type
• Head Diameter：Small Head
• Exhaust Way：Exhaust Outside
• Number of Holes：Non
• Connection：Without Quick Connector
• Rotating Speed：Low-Speed Handpiece
• Bur Size：2.334-2.355(mm)
• Reversal Rotation Speed：16(Krpm)
• Noise：<65dB
• Air Pressure：0.25-0.3(MPa)
• Torque：0.4-0.45(N)
• Transport Package：Standard Export Carton
• Specification：400g,set
• Trademark：Topmed
• Origin：China
• HS Code：90184100
• Production Capacity：500set,Month

Features:


Contra angle :

Low speed 22,000-27,000 rpm.
The shank of the instrument mounted therein is 2.35 mm
Fastening of the instruments with a turning latch
Autoclavable 135°
For any lab or E-type motors

Straight Handpiece(With metal clasp ring):

 
Working pressure: 0.3MPa
0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure)
Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
Noise: ≤68dB
Air consumption: about 56L/min
Ratio: 1:1
Max speed of contra angle: 25000rpm/min

Air Mortor EX-203C:


Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
1:1 Direct Drive
2 holes/4 holes
Max speed 20,000 min-1

Picture












Handpiece maintaince

There are two methods of cleaning dental handpieces. One is to use an automatic handpiece system, such as the QUATTRO care Plus, prior to sterilization. The other option is to manually maintain your handpieces. If you elect to manually maintain your handpieces, here are the steps to do so. 
 
 
Step 1: Clean Handpiece
The first step in cleaning a dental handpiece is to lightly wash the handpiece under cool running water to remove excess debris.

Step 2: Handpiece Lubrication
Following external cleaning, connect the handpiece to the handpiece lubricant spray using the appropriate nozzle for the handpiece you are cleaning. For this air handpiece, we are using a multiflex nozzle.  Spray for approximately 2 seconds. We recommend using a cloth or paper towel wrapped around the handpiece to contain the spray. It is ok if some excess lubrication remains in the handpiece.

Step 3: Purge Handpiece
After lubrication, you'll want to purge your handpiece. Simply connect the handpiece to your multiflex connection, step on the foot petal and purge for 30-40 seconds. The handpiece is now ready for sterilization.